Upgrading Xantrex SW Systems |
|
|
Custom designs and hardware kits are available. Contact us for pricing. |
|
Before and After Photos |
|
 |
 |
| One SW system installed by home owner. | Same system after upgrade. |
 |
 |
| One SW inverter and one MX60 before... | Same system after upgrade. This is using the last Outback PS4 system available. |
 |
 |
| Custom charge control system before upgrade. | Same System with 2 FM80 charge controls after upgrade. Notice we are now using the silver Flexware 1000 hardware. This hardware requires custom modification. |
Design and Fabrication Procedures |
|
 |
 |
| Every upgrade starts with a conceptual diagram. | The next step is a point-to-point wiring diagram that the shop crew can follow without resorting to thinking. Certain aspects of how we configure these systems are proprietary. |
 |
 |
| The Outback mounting plates require a custom modification. | The Outback FX1000 cabinets require that holes be cut. |
 |
 |
| Flexware 1000 cabinet modified for SW inverters. | Flexware 1000 DC cabinet mated to the SW inverter. |
 |
 |
| The AC cabinet gets lacing strips installed to hold wiring in place. | AC Cabinet interior after wiring. |
 |
 |
| AC leads in place, in the correct order, ready for connection in the field to the SW inverter. Note the "alligator" grommet to protect wiring. | Full side view AC of cabinet ready for install. |
 |
|
| Proprietary bussing hardware completes the Input/Output/Bypass Section. A proprietary interlock completes this assembly. | |